PHARMALINE
The homogeneous hose construction of ELAPHARM where all layers incl. the lining are permanently bonded to each other. This results in a good kink and vacuum resistance and assists durability and flexibility
HOSE TYPES, DESIGNS & APPROVALS
ELAPHARM electrically isolating ' I ', blue cover. Corresponds to DIN 26055-3, Type A. Homogeneous elastomer hose construction with smooth, white Teflon® PTFE liner
Lining - Teflon® PTFE white, permanently bonded with reinforcement, non electrically conductive, seamless, smooth, FDA conform *). Reinforcements - DN 13 - 19 stainless steel braids, no helix DN 25 - 50 high-tensile, temperature restistant textile braids, stainless steel helix Cover - EPDM blue, satin finish, non electrically conductive, FDA conform **

ELAPHARM OHM electrically conductive 'Ω / T', black cover. Corresponds to DIN 26055-3, Type B. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.
Lining - Teflon® PTFE black, permanently bonded with reinforcement, electrically conductive, seamless, smooth, FDA conform *). Reinforcements - DN 13 - 19 stainless steel braids, no helix DN 25 - 50 high-tensile, temperature restistant textile braids, stainless steel helix Cover - EPDM black, satin finish, electrically conductive

ELAPHARM OHM G electrically conductive 'Ω / T', light grey cover. Corresponds to DIN 26055-3, Type B. Homogeneous elastomer hose construction with smooth, black Teflon® PTFE liner.
Lining - Teflon® PTFE black, permanently bonded with reinforcement, electrically conductive, seamless, smooth, FDA conform *). Reinforcements - DN 13 - 19 stainless steel braids, no helix DN 25 - 50 high-tensile, temperature restistant textile braids, stainless steel helix Cover - EPDM light grey with OHM conductive stripe, satin finish, electrically conductive.

FURTHER TECHNICAL INFORMATION
The homogeneous hose construction of ELAPHARM where all layers incl. the lining are permanently bonded to each other. This results in a good kink and vacuum resistance and assists durability and fl exibility. The FDA-conform PTFE liner is suitable for all commonly used media in the foodstuff , pharmaceutical and chemical industries. It is easy to clean and also suitable for highly viscous media. There is a choice of fi ttings, e. g. free of dead spaces / fl ared, meaning the PTFE lining fl ared over ends, no entrapment. Hose assembling to customer specifi cation is done in-house by Elafl ex, straight from the reel – for a fast delivery of your assemblies.
• Clean transfer : hose assemblies for highest media purity requirements
• ultra smooth lining of DuPont Tefl on® PTFE
• fl exible, homogeneous, kink resistant, pressure and vacuum resistant elastomer hose construction to DIN 26055-3 ( EN standard in preparation )
• FDA / USP Class VI conforming
• as ELAPHARM ( non electrically conductive ) or ELAPHARM OHM ( fully electrically conductive )
• nominal bore DN 13 – 50 mm
• up to + 150° C, vacuum 0,8 bar, PN 16

CRIMPED END FITTINGS
- Sanitary and Mini Sanitary Triclamp (Triclover) Fittings in 316 SS, with bores electropolished to <0.375μm (<15μin).
- I-Line Fittings, Compression Fittings, BSPT & NPT Male, Flanges, Camlocks, DIN11851, RJT, SMS, RJP and others are also available to special order.


RELINK END FITTINGS
For ELAPHARM we offer among other the following coupling types with integrated hose tail.
Screw, flange and clamp connections to DIN 32676 ( 'Triclamp' )
DIN 11864 - 1 / -2 / -3 ( 'Aseptic' )
DIN 11853 - 1 / -2 / -3 ( 'Hygiene' )
DIN 11851 ( 'Foodstuff Thread' )
EN 14420-7 ( 'Cam Locking Couplings' )
Flanges e. g. EN 1092-1
Welding Nipples acc. DIN 11866
For pharmaceuticals, biotech media and foodstuff s we suggest the following two systems.
Crimping ' free of dead spaces / flared '
Crimped hose coupling, PTFE lining fl ared over ends. Patent pending for process. No entrapment, use for highest media purity requirements. Usually used with DIN 32676 ( Triclamp ) or flanged hose couplings.
Crimping ' gap minimised '
Crimped hose coupling with flush-mounted hose tail. No obstruction of inner cross-section, almost no gap or dead volume between lining and hose tail. For high purity requirements. Suitable for all coupling types.

See more

Chemical Resistance
Table Hoses

 
Hoses

Ducting
hoses

Follow us:

   

Contact us:

About us

Dais Global LTD is founded in 2005, we are leading company in:
- Supplying equipment and maintenance for fuel tank trucks, LPG tanks, bulk tanks, chemical tanks and other transport units for hazardous loads.OPW Market have also service station for maintaining the tank trucks
- Supplies brand new and second hand tank trucks for fuels, LPG, chemicals, foods and bulk tank trucks
- Supplies equipment for petrol and chemical vehicle trestles and railway trestlesv
- Hoses and couplings for hoses(nozzles)
- Industrial pumps and flow meters. Maintenance and spare parts for pumps. BUSCH vacuum pumps, vane and centrifugal pumps BLACKMER, Alfons HAAR, PIUSI and others
- Supplying gas stations equipment.
With its entry into the segment of hoses and nozzles OPW market have modern presentations of the hoses. For the required hoses you could always find a competent salesman who will advise you in choosing the best hose for your needs.

Search

Translate

Our partners

Parker Hannifin
GASSO
ELAFLEX
NORRES